Some Solutions To Fix Canon Printer Error

Canon printers can print pages up to the point where the ink absorber has reached its limit. Canon printer error 5b00 can occur when the waste ink absorber is full. This error code will appear on the LED display if ink spills onto the printer.

Sometimes the main reason for this error can be found in the dirty waste ink absorber. canon support code 5b00 This issue can cause you to not receive the desired print result.

We are here to help you overcome this technical problem.

Fix Canon Printer Error #5B00 With 4 Simple Methods

Use the solutions provided to solve the problem.

Solution 1: Use Service Mode

Let's begin with the basics of troubleshooting. It is recommended that you turn off your Canon printer first. After waiting for a while, turn the printer on again. Check the status code.

If the Canon printer is not working, you will need to restart it. Next, set the Canon printer's Service Mode.

For the task to be completed, press and hold the Power button for between 5-10 seconds. Release the Power button after that.

Next, press the Zoom button 5-6 times. If the LED lights are on twice, the Canon printer has entered the Service Mode. Move to the Control Panel to confirm that Service Mode is active.

Scroll down and tap the "Devices and Printers” option in the Control Panel. You will see the Printer Status set to Offline. This indicates that the Service Mode has been enabled.

Check if the error code was removed. If the error code is still present, proceed to the next step.

Solution 2: Verify the Ink Level

This issue can sometimes be caused by the ink system installed. Here are some steps to eliminate it.

First, unplug your printer. If you are using a USB cable to connect the printer to your computer, you must also unplug the USB cable. You must also press and hold the Power button. The next step is to plug in the power cable into the power socket.

Continue pressing the Power button until your Canon printer resets itself automatically. When all lights are on and the Canon printer is making no sounds, you must release the Power button.

Wait until the green power lamp turns off. You will need to press and hold the Power button twice. The green light will now blink for approximately 2 to 3 seconds, and then it will stabilize.

Then, restart your computer and your Canon printer. This should resolve the problem. Here's another solution if that fails.

Solution 3: Clean the Ink Waste Manually

To manually clean the Waste Ink you will need to first open the Canon printer's lid and remove the ink cartridges. You will now see a small box, similar to a foam pad, just near the roller.

Use a soft towel to press the foam. The ink will then be released. The foam must be cleaned until all inks are removed. Next, insert the cartridges into the slot.

Close the printer lid. Once you are done, turn on your Canon printer. Turn off your Canon printer. After a few seconds, turn the printer back on.

Solution 4: Use Canon Service Tool Program

First, download and install the Canon Service Tools program. Navigate to the EEPROM tab.

Tap on the EEPROM status before you start the resetting process. This will prompt you to provide the paper source tray. It defaults to be set to the rear tray. Click on it to display the message "A function was completed".

Tap on the Main option. Next, tap the Settings icon. The printer reset procedure will begin. The resetting process may take some time so be patient.

The LED lights will continue to flash when the resetting process begins. The LED lights will stop blinking when the reset procedure is complete.

Tap again on the EEPROM status to select the EEPROM Save option. This will bring the EEROM back to 0%, and the problem will be fixed.

1. What should you do if a "Printer in Error State” message appears on the display?

If you see the message "Printer in error" on your display, make sure that the printer is on and connected to the computer. You should also ensure that the paper is not jammed in the input tray.

2. How do I reset the Canon Printer Ink Absorber

At the beginning, make sure that your Canon printer is off. For a few seconds, hold down the Resume button. Continue holding the Resume button, and then press the Power button.

The green light will begin blinking. Hold the Power button down and release the Resume button. Next, double-press the Resume button. Next, release the Power button. Next, press the Resume button four more times and then again press the Power button. The printer will now be reset.

Location: New York, NY, USA

Comments

Post a Comment

Popular posts from this blog

Best Information About Norton Antivirus

Image
The integral component you may additionally see about Norton Internet Security 2017 is that the application is on a very simple degree the identical to the 2016 discharge as to affirmation and the segments it offers, alternatively, there are a couple of corrections to the direction in which these aspects are displayed to the customer Norton Internet Security 2011 basically extra easy than its 2010 accomplice. 1. Advanced Norton Insight Function When inserting in new ventures on your PC, Norton Internet Security 2017 will discover every one of these undertakings to the extent their records and region of beginning and distinction the information it assents and a database involving the whole Norton Community of fifty-eight million customers. This examination test helps Norton pick out if the software you are making an attempt to existing may additionally be suspect or has made problems for several customers. Besides, Norton Insight, an element fused into Norton Internet Security 2017, wil
Read more

Get Best Solution With Windows 7 Customer Service

Image
Windows 7 is a working system that comes under the parental control of Windows NT family and produced by"Microsoft". The release date for the production of windows was July 22, 2009, while its overall availability for consumers was October 22, 2009. It's the successor of its earlier version Windows Vista. It was developed to overcome and update software and hardware compatibility with its predecessor. Some enhanced features of windows 7 can be addressed because of the improved user interface ( windows aero ), redesigned taskbar that permits attachment of applications within it. Various other features that led to the attractiveness of its makeup include libraries, improvised file sharing platform HomeGroup, and service to get multitouch input. To keep the security and maintenance of the system, a new" action center" interface has been added while the user accounts control system was made less invasive. If you have any additional queries about windows oper
Read more

Complete Internet Security With Webroot

Image
In brief, you need your PC to maintain best shape all of the time, so you don't need to fret about the viruses lurking in questionable elements; appropriate? Therefore, why don't have it and obtain full control and access to a PC. After all, you're the proprietor; why let anybody take charge of your own life and solitude? If that is what you need, get Webroot complete Internet Security 2019 installed in your PC straight away. The amazing Webroot app comes labeled with excellent user interface and attributes. It not only protects your PC from becoming into clutches of malicious applications, but also boosts the performance of your computer. This fantastic combination is not easy to find, if you don't have Webroot complete Internet Security 2019 installed on your own PC. As its name suggests, this program provides a range of great and productive services which can make you amazed. Installation of this software is simple and requires only a few moment to get tri
Read more