Simple Techniques To Solve Brother Printer Error

Brother has a reliable name for printer devices. These gadgets are robust and can easily be set up on a PC. The simple interface assures that everyone can use the printer without any complications. But there are few common errors that may be encountered while using Brother printer.

Brother printer not connecting

Getting into printer connection errors is very common. This error can appear when the cable is loose or gets damaged. In the wired Brother printer connection, inspect the connection cable. Eject it from both devices and then insert it carefully to ensure that the connection is not weak. If your cable is damaged like any kinks then replace it. Use a working high-speed cable for the printer. If using Brother on the network, inspect the access point. Check the router for the connection. Turn off the router to shut the connection. Restart it and now search the network on the printer. Connect the Brother printer to the correct network and access it reliably.

No Cartridge error

While taking the printouts, the printer starts showing a No Cartridge error. This occurs when the Brother device can’t find the cartridge. The user often faces this error after installing a new cartridge. Open the access door and remove the installed cartridge. Many times, you forget to remove the plastic protective pin before installing the cartridge. Check the cartridge and then reinstall it. When the Brother printer can’t find the clone cartridge; get the original one. Some of the Brother printer models don’t support third-party cartridges. When the ink cartridge is empty then you can refill it or can get a new original cartridge. After installing a new cartridge, if the slot is still showing 0 status then remove all the other cartridges. All the slots will show 0. Now start installing the cartridges and then check the slot status.

Memory full warning message

Brother printer has inbuilt memory which stores all the print commands. When you send the job from PC; it gets stored on Brother memory. Users get this error when they are taking printouts simultaneously. Every printer has a different memory size. When the user sends lots of print jobs at one run; the printer shows the memory full warning. You should reduce the number of print jobs. When the printer is running currently; you should wait until it finishes all the pending jobs. In case you need to take a printout urgently then pause the printing and cancel the job. Take your printout and then resume the queue printing process.

Printer in error state

Sometimes the printer suddenly shows the Brother printer in error state and stops working. Whenever you get the error state message; check the Brother driver. The printer shows an error when it can’t understand the job. If the driver is not working then the printer can’t read any of your print commands. Go to the connected computer/phone and check the driver. Update the Brother driver to the latest version and then try to run the printer. If the driver is not working then reinstall the correct setup on your device.

Faded Printer

When you are getting issues with printing quality; check Brother printer ink level. If the level is very low; replace the cartridge. The user can also refill the cartridge. Refill it very carefully as the ink contains carbon contents. Users should use a mask to cover their mouth and nose before refilling. Visiting the nearby hardware shop can also be helpful for ink refill. But when you have enough ink on the cartridge and printouts are faded then check the printhead. It gets clogged with dry ink and can’t print correctly. Go to Brother printer and run the cleaning kit. After cleaning, take the print test and check its quality. If it is still low, run the tool again. Also, use good paper and the ink can’t work on too thin or thick paper.

Brother printer is running slow

Printing speed will affect when you use the printer on the network. Wired connections also provide better speed. Use a high-speed cable and your Brother printer will start working with good speed. While using the network, keep the Brother printer near your router. For black and white printouts; change its mode. Use the low printing mode and the printing speed will increase immediately.

Comments

Popular posts from this blog

Best Information About Norton Antivirus

Complete Internet Security With Webroot

Get Best Solution With Windows 7 Customer Service