Canon Printer Service Tool

To ready the printer to be prepared for use, whenever the printer is switched on or may start printing, then the pump will automatically suck ink, and then stream it into the printing head so the print head is prepared to print. This ink suction, which creates waste ink that's in the waste ink pad kit. Until one day that the waste ink pad apparel reaches maximum potential, and an error happens. This mistake occurs in 2 phases:

Phase 1 is known as"Operator Call Error"

Once the waste ink pad kit reaches 95 percent power, the printer provides a warning"Caution: Ink absorber gets virtually complete, code [1700]". If this warning occurs, press the Resume / Rename button (to get G1000 string ), or even the Stop button (to get G2000 collection, G3000 string ), to dismiss the mistake so printing can last.

Phase 2 is known as"Service Call Error"

Once the waste ink pad kit reaches 100 percent power, the printer provides an error message"Ink absorber complete, code [5B00]". If this error occurs, the printer can't be utilized, and have to be fixed immediately.

Option

once the waste ink pad kit reaches a max potential of 100 percent, repairs are created in 2 phases: 1) Change the waste ink pad kit, lasted 2) Reset the waste ink pad counter worth. Repair starts with the replacement of the waste ink pad since it's filled with ink. Then the next thing to do is to reset the waste ink counter since it's reached 100 percent. error 5b00 canon g2000 Reset is done to reset the waste ink counter zero. There are two options Which Can Be done to fix errors

Option #1 is known as"Partial Replacement"

Partial replacement is just partly replaced by the absorber kit. Because only partly replaced by the absorber apparel, the more waste ink counter is reset to 30 percent. The next is how to replace.

Eliminate the rear cover screws remove the rear cover.

QC5-2866-000 and QC5-2868-000) subsequently substitute it with a new one

Absorber Kit for Canon G1000 collection, G2000 Collection, G3000 collection Can Be Bought in the market with P/N. QYF-0558-000. Absorber apparel with P/N. For partial replacement, then the absorber ink set up is just P/N. QC5-2866-000, also QC5-2868-000 (see image below).

Following the ink, the absorber has ended replacement, replace the rear cover of this printer, then begin the process to reset the waste ink counterclockwise.

Glue the waste ink pad counter worth

Refer to this information in Canon G1000 string, G2000 collection, G3000 string Service Manual, to reset the waste ink counter utilize Service Tool v.4718. Before we start utilizing the Service Tool, it is fantastic to understand what a Service Tool is. Service Tool is an instrument utilized to convert Canon printers following component replacement, for example, Logic Board Assy, Waste Ink Absorber, Print Head, etc. Since the ink absorber has been substituted to reset the waste ink counter we utilize a tool known as the Service Tool. This is how to utilize the Service Tool.

To Canon G1000 string, press on the Resume/Cancel button

To Canon G2000 string and G3000 Collection, press the Stop button

Service style performance approaches:

1) Switch a printer off

two ) Press and maintain that the Resume/Cancel/Stop button

3) Press and maintain the ON button (don't release both buttons)

4) Release the Resume/Cancel/Stop button (don't launch the ON button)

5) While holding the ON button, then press on the Resume/Cancel/Stop button 5 occasions **, then release the ON and also Resume/Cancel/Stop buttons collectively (upgrade: How to perform step 5).

Whilst holding the ON button, then press and then release that the Resume/Cancel/Stop button 4 occasions, subsequently press and maintain that the Resume/Cancel/Stop buttons 1 moment, subsequently launch both the ON and Resume/Cancel/Stop switches together.

Notice:

**: To disable the scanner malfunction discovery and start the system at the service mode, press on the Resume/Cancel/Stop button 6 days. In this manner, the service style can be obtained with no scanner.

If you're using Mac OS X, please see the next article How to start Canon Service Tool out of mac OS X.

Ink absorber countertop, pick MAIN (two ), click Counter Value(percent ) choose: 30 percent (3), then click SET (4). Following the waste ink, the pad counter value is reset, then the offset value is published. Watch the D value"Waste ink mat counter worth". Compare D values prior to and after reset.

If all works well, shut Service Tool

switch off the printer (wait 15 minutes )

Switch on the printer and printer prepared to utilize

Following the waste ink counter was uninstalled, the fix procedure together with the"Partial substitute the absorber kit" was finished. The following discussion is that the fix procedure with all the"Complete substitute the absorber kit" process.

Option #2 is known as"Total Replacement"

To substitute ink absorbers, the printer has to be entirely disassembled, since the ink absorber is in the base of the printer (underside instance ). For total replacement of these ink absorbers, reset the waste ink counter to 0 percent. The next is how to perform a "Total Replacement".

Absorber Kit for Canon G1000 collection, G2000 collection, G3000 collection can be bought in the market with P/N. Along with substituting the absorber kit, also wash out the ink absorber plate and the base case unit. Along with substituting the absorber kit, also wash out the ink absorber plate and the base case unit. So for your"Complete Replacement" procedure that has to be done are:

1) Fixing the absorber kit

2 ) Fixing the platen ink absorber

3) Fixing the underside case unit.

Remember, since the absorber kit is made up of six components, the setup of this new absorber kit has to be based on its initial position. When eliminating the absorber kit, then we have to recall its initial place, so that installment mistakes don't happen. Once all of the jobs are done, compress the printer and be certain the assembly procedure is performed properly, so no additional undesirable mistakes happen.

Here is how to get it done.

Glue the waste ink pad counter worth

reference this information in Canon G1000 collection, G2000 collection, G3000 string Service Manual, to reset the waste ink counter utilize Service Tool v.4718.

To Canon G1000 string, press on the Resume/Cancel button

To Canon G2000 string and G3000 Collection, press on the Stop button

Service manner performance processes:

1) Switch off a printer

two ) Press and maintain that the Resume/Cancel/Stop button

3) Press and maintain the ON button (don't release both programs )

4) Release the Resume/Cancel/Stop button (don't launch the ON button)

5) After holding the ON button, then press on the Resume/Cancel/Stop button 5 occasions **, then release the ON and also Resume/Cancel/Stop buttons collectively (see: How to perform step 5).